Vibrating subsoiling refers to the use of vibrating subsoiling components to subsoiling the whole layer of soil.The basic principle of vibrating subsoiling machine is to use the tractor power output shaft to drive the vibration source, causing the subsoiling working parts installed on the rack to vibrate at a certain frequency and amplitude, the machine moves forward, and the subsoiling working parts vibrate up and down or left and right at the same time. Vibration.Tests at home and abroad have shown that the total power of the tractor is not significantly different from that of the non-vibrating subsoiling equipment using the vibration subsoiling principle, and the traction resistance is significantly reduced (up to 20% to 30%).The use of vibration subsoiling principle can enable small and medium-sized tractors to carry out subsoiling operations.Its representative products are the 1SZ series vibration subsoiling machine, which adopts L—shaped soil loosening parts and is arranged symmetrically from left to right. The subsoiling working parts vibrate up and down, with an amplitude of 15 to 35 cm and a frequency of 8.5 to 9.3 Hz. Among them, the 1SZ-140 multifunctional vibration subsoiling machine supporting the 13.2kW tractor can reach a working depth of 35 cm.In addition to being used for deep loosening operations, this series of products can also be used to harvest potatoes, sugar beets, Chinese herbal medicines, etc.