Small tree planting digging machine: What are the specific methods for fuel-saving operation of the digging machine?

     Pit digging machines have played an important role in affording trees. Although pit digging machines save people manpower and material resources, people do everything they can to make pit digging machines more fuel-efficient. In fact, the fuel-saving operation of pit digging machines is also very skilled. Here is an introduction to the fuel-saving operation method of pit digging machines!

　　1.In the transportation operation of tractors, it is necessary to master the technical essentials of shifting gears with a two-legged clutch to avoid stopping and shifting gears.Do not suddenly change the speed while driving, increase or decrease the throttle sharply; try not to use or use less braking to reduce power consumption.

　　2. Tires should maintain a high air pressure, and the inflation pressure should generally be 100~150kPa higher than the specified value, but not exceed the maximum pressure.Choose tires with the right air pressure and size. When buying tires, it is best to choose tires with a cross-section width greater than the height.Give full play to the adhesion between the tire and the soil, maintain the appropriate angle and height of the tire pattern, increase the adhesion of the tire to the soil, and reduce slippage.

　　3.Engine lubricating oil (engine oil) should be sufficient, refueling should be carried out in the parking state, and the oil surface should be added close to but not exceeding the marking line on the dipstick; diesel purification should be done well to ensure the cleanliness and quality requirements of the lubricating oil.

　　4.Carefully inspect and maintain the air filter in accordance with regulations to reduce the air intake resistance, and do not wrap the air inlet of the air filter with cloth or other materials.

　　5.Correctly adjust the mating gap of each transmission of the locomotive to reduce the power consumption of the transmission part; correctly adjust the mating gap and traction gap of the traction equipment to ensure that it is not loose or stuck.

　　6.The working gear is reasonably selected so that the engine is often in a working state where the fuel is completely burned.The throttle should choose an economical working position, subject to the fact that the engine does not emit black smoke; if the engine emits black smoke, the gear should be appropriately lowered.